Tuesday, May 26, 2009

Tips to Take Care of Motorcycle Chain

Hi All,

Just to remind you that we are now present at http://wheelsguru.com/

So hope to see you all there.

Wheels Guru

A very important two wheeler part that sometimes creates problem and requires special attention is the motorcycle chain. Made of metal based rings, motorcycle chain functions to transmit power to the rear wheel.

Due to excessive usage, hours of continuous functioning or lack of maintenance, the motorcycle chains either wear out or become loose. The basic idea about motorcycle chains, their functioning and few maintenance tips would help to take care of the motorcycle chains.

How often should the motorcycle chain be inspected?

It is mostly recommended that one should follow the automakers' instructions that comes in the motorbike manual. Auto Repair Experts suggest that motorcycle chains should be inspected after the motorbike runs for every 1000 - 1200 kilometers. The inspection period might vary if the motorcycle is used aggressively or rider has a habit of rash riding. Rash driving leads to worn out chain.

Chain Maintenance involves the following attentions:
  • Inspection
  • Replacement
  • Cleaning
  • Wiping
  • Lubrication
  • Adjustment
  • Tightening

Periodical Inspection

- Motorcycle Chain
Ensure that the motorcycle chain is able to move roughly up and down easily. The approximate measure for the chain to move should be one inch both ways. One can either have a visual idea or can manually measure the chain with a measuring tape.

One needs to check the motorcycle chain at all the spots and sections.

Motorcycle chain if found to be loose, need to be tightened. Ask an auto repair mechanic to do that for you.

In case, the chain is too tight, it needs repair or moreover replacement is always a better option.

- Check the Motorcycle's Sprockets

It is important to check the motorcycle sprockets because its teeth can clearly indicate that the chains are not properly adjusted. Closely observe these teeth and ensure that they mesh well with the motorcycle chain.

If you find the sides of teeth to be worn out, this is a clear indication that the chain and teeth are not meshing well. New motorcycle sprockets will help to get rid of this problem.


Inspection

Wiping and cleaning is always a suggested task that would help to keep any man, machine or automobile well functioning. Clean and well-lubricated motorcycle chain helps in smooth motor riding.

Always use o-ring approved cleaning agent to clean the dust and dirt off the chain. Using a soft brush for applying and rubbing off dirt is preferred.

Make sure the excess of grime from the chain links and all sprocket teeth is also wiped off with the use of a soft piece of cloth.

Lubrication

Now that cleaning of teeth and chain is done, it is important that chain should be lubricated for a smooth drive. Use superior quality lubricant and try spraying it smoothly over the chain.

Rotate the motorcycle wheels to properly lubricate the motorcycle chain.

Adjusting the Chain

Now its time for adjusting chain tension that is the to adjust the alignment of the motorcycle chain. There is a certain set distance between the front sprockets and rear sprockets. This distance needs to be adjusted. One can test whether the chain tension has been adjusted or not. This can be done by moving the chain up and down. If it moves till 1 inches, then the chain tension has been adjusted.

Tightening

Your maintenance work is done. All you need to do is to evenly tighten the rear axle so that both sides are perfectly aligned. Make sure to properly align the motorcycle chain and sprockets.

Before starting the maintenance and inspection work, make sure you have all the apt motorcycle tools with you. Follow these maintenance tips to take care of your motorcycle chains that might affect smooth functioning of the motorbike. Care and caution will keep you safe and your driving experience a smoother & enjoyable one.

These small steps in our day to day life can help in the long term maintenance of your two wheels



Just to remind you that we are now present at http://wheelsguru.wordpress.com/

So hope to see you all there.

Wheels Guru

6 comments:

  1. Hello. i loved to read your blog.
    the content and theme of writing is quite nice.
    Help me with your suggestion about my blog
    http://jugaadworld.blogspot.comhope to have your precious suggestions about my blog.

    ReplyDelete
  2. Nice post. I don't have a motorcycle but I will use these techniques for my bicycle for now. I will buy a morotcycle after I am 18 and then I will use these techniques. Thanks.

    Mohammad Afaq
    Free Website Traffic

    ReplyDelete
  3. Do NOT Ask an "Auto Mechanic" to Adjust your chain unless they own and ride a motorcycle! 1" free play? Always follow the instructions in your owners Manual. Some bikes require the "Slack" in the chain to be checked on the side stand. Others to be checked with the bike upright. And a few, with the riders weight on the bike[Upright]A couple other Tips. Do not clean with gasoline or harsh solvents.This can damage the O rings. Do not lubricate with WD-40. If you do not have Motorcycle chain Lube,use 90wt gear oil[Many Motorcycle Companys Recommend this] Make sure to wipe of any excess to keep it off the tire. And most important, Do not lube chain on center stand with motor running! You could lose a finger! Ride Safe .

    ReplyDelete
  4. How many kilometers does a motor bike chain last?

    ReplyDelete
  5. If we clean a motorcycle chain on a regular basis, then the motorcycle chain will be strong and durable. That was the advice I have written based on my experiences.

    ReplyDelete
  6. Howdy! This is kind of off topic but I need some help from
    an established blog. Is it very difficult to set up your own blog?
    I'm not very techincal but I can figure things out pretty fast. I'm thinking about
    creating my own but I'm not sure where to start. Do you have any ideas or suggestions? Cheers

    my blog ... org.uk

    ReplyDelete